Nissan ARIYA 2023 Owners Manual
9.1.1.2. TPMS resetting
To keep the TPMS functioning properly, the reset operation must be performed in the following cases.
when the tyre pressure is adjusted
when a tyre or a wheel is replaced
when the tyres are rotated
Perform the following procedures to reset the TPMS.
Park the vehicle in a safe and level place.
Apply the parking brake and push the park button on the shift lever to engage the P (Park) position.
Adjust the tyre pressure on all four tyres to the recommended COLD tyre pressure shown on the tyre placard. Use a tyre pressure gauge to check the tyre pressure.
Place the power switch in the ON position.
Press the
button (1) until [Settings] appears.Use the scroll dial (2) until [Tyre Pressures] is selected, and press the scroll dial (2).
Use the scroll dial (2) until [Calibrate] is selected, and press the scroll dial (2).
Use the scroll dial (2) until [Yes] is selected, and press the scroll dial (2) to reset the TPMS.
After resetting the TPMS, drive the vehicle for several minutes at speeds above 25 km/h (16 MPH).
If the low tyre pressure warning light illuminates after the resetting operation, it may indicate that the TPMS is not functioning properly. Have the system checked by a NISSAN certified electric vehicle dealer.
For information regarding the low tyre pressure warning light, see
.