Nissan Juke 2026 Owners Manual
7.23.2. How to enable/disable the Intelligent Driver Alertness system warning
- (1)Steering-wheel-mounted control (left side)
- (2)Vehicle information display
Perform either of the following steps to enable or disable the Intelligent Driver Alertness system.
Shortcut Menu
Type A (where fitted)
The Intelligent Driver Alertness system can be turned ON/OFF using [Driver Assist Custom] and [Custom Mode Setup].
Type B (where fitted)
The Intelligent Driver Alertness system can be turned ON/OFF using the Shortcut menu. Select [Driver Assistance] and select [Driver Attention Alert] and push the scroll dial.
Refer to
for more details.Settings
When [Driver Assist Custom] setting is ON, Driver Attention Alert cannot be adjusted through the [Settings] menu. To adjust Driver Attention Alert setting when [Driver Assist Custom] is ON, go to the [Custom Mode Setup] menu in the [Shortcut Menu].
Type A (where fitted):
Use the
or 
button on the steering wheel until [Settings] is shown on the Vehicle Information Display and push the scroll dial.Use the scroll dial to select [Driver Assistance]. Then push the scroll dial.
Select [Driver Monitoring] and push the dial to turn the system on or off.
Type B (where fitted):
Use the
or button on the steering wheel until [Settings] is show on the Vehicle Information Display and push the scroll dial.Use the scroll dial to select [Driver Assistance]. Then push the scroll dial.
Select [Driver Attention Alert] and push the dial turn the system on or off.
Type A (where fitted)
Intelligent Driver Alertness system will automatically be turned on when the engine is restarted.
Type B (where fitted)
The setting will be retained even if the engine is restarted.
As long as the Steering Assist system (where fitted) or ProPILOT Assist system (where fitted) is activated the Intelligent Driver Alertness system will be deactivated. Turning off the Steering Assist or ProPILOT system reactivates the Intelligent Driver Alertness system.