[Lighting]

[Locking]

[Wipers]

[Mirror Fold]

[Welcome Light]:

The welcome lighting can be set to be ON or OFF. From the [Lighting] menu, select [Welcome Light]. Use the scroll dial to turn this feature ON or OFF. When set to ON, front and rear lamps will stay on for 30 seconds after unlocking. They will also stay on for 15 seconds after locking.

The front and rear lamps may turn on again for 10 seconds when the Intelligent Key is moved outside of the set detection zone (approx. 2.8m) or after 2 mins if the ${1} remains motionless within the set detection zone.

[Auto Room Lamp]:

The internal light timer can be set to be ON or OFF. From the [Lighting] menu, select [Auto Room Lamp]. Use the scroll dial to turn this feature ON or OFF.

[Mood Lighting] (where fitted):

The mood lighting can be dimmed or brightened. From the [Lighting] menu, select [Mood Lighting]. Use the scroll dial to adjust the brightness.

[I-Key Door Lock]

This item can be used to switch off "Approach Unlock & Walk Away Lock" function and also to activate or deactivate the rear door opener switch.

[Selective Unlock]

When this item is turned on, and the door handle request switch on the driver’s or front passenger’s side door is pushed, only the corresponding door is unlocked. All the doors can be unlocked if the door handle request switch is pushed again within 5 seconds. When this item is turned to off, all the doors will be unlocked when the door handle request switch is pushed once. From the [Locking] menu, select [Selective Unlock]. Use the scroll dial to activate or deactivate this function.

[Walk Away Lock]

This allows user to turn the walk away lock function ON or OFF. (See

[Approach Unlock]

This allows user to turn the approach unlock function ON or OFF. (See

[Horn & Alert]

When selected, the alert is displayed and the horn sounds.

[Alert Only]

When selected, only the alert is displayed.

[OFF]

When selected, no alert or horn will be active.

[Speed Dependent] (where fitted)

The Speed Dependent wiper feature can be set to be ON or OFF. From the [Wipers] menu, select [Speed Dependent]. Use the scroll dial to turn this feature ON or OFF.

[Auto Wipe]

The Rain Sensor feature can be activated or deactivated. From the [Wipers] menu, select [Auto Wipe]. Use the scroll dial to turn this feature ON or OFF.

[Reverse Link] (where fitted)

The Reverse Link wiper feature can be set to be ON or OFF. From the [Wipers] menu, select [Reverse Link]. Use the scroll dial to turn this feature ON or OFF. If set to ON, the rear wiper will operate if the front wipers are switched on and the gear shift is in the R (Reverse) position.

[Drip Wipe] (where fitted)

The Drip Wipe feature can be set to be ON or OFF. From the [Wipers] menu, select [Drip Wipe]. Use the scroll dial to turn this feature ON or OFF. If set to ON, the wiper will operate once about 3 seconds after using the washer. This operation is to wipe washer fluid that has dripped on the windscreen.

[Auto Fold Off] (where fitted)

When this item is turned on, the auto fold feature for the outside rear-view mirrors is disabled. Use the scroll dial to select this function.

[Unfold at Ignition] (where fitted)

When this item is turned on, The outside rear-view mirrors automatically fold when the ignition is switched off, and unfold when the ignition is switched on. Use the scroll dial to select this function.

[Unfold at Unlock] (where fitted)

When this item is turned on, The outside rear-view mirrors automatically fold when the vehicle doors are locked, and unfold when the vehicles doors are unlocked. Use the scroll dial to select this function.